DdrRW

Questions and answers

Short answers about the dump database, privacy, repair and DdrRW.

The dump database

Do I need an account?

Not to search and download. To send dumps you need an account: sign up here on the site or in the DdrRW software (menu "Database", item "Account").

Create an account

Which modules does the database accept?

SDRAM, DDR, DDR2, DDR3, DDR4 and DDR5. The database does not accept LPDDR dumps.

How do I find a reference?

In DdrRW: menu "Database", item "Find Reference Dump". Search by memory type and part number, even a partial one. The dump you pick opens straight in the program. Modules under one part number can have different chips, and their SPDs differ. So the results show the chips of each dump: manufacturer, die density, width and stepping. DdrRW preselects the dump with the same chips as the open image.

What happens to a dump I send?

The server zeroes its serial number and checks the dump, then a moderator reviews it. Once approved, the dump appears in the database. You can follow your dumps in your account on the site and in the software (menu "Database", item "My Uploads").

My uploads

Why was my dump not accepted?

The server refuses an empty dump (all FF bytes), a dump of an unknown type or of LPDDR, and a dump whose size does not match the memory type: 256 bytes for SDRAM to DDR3, 512 for DDR4, 1024 for DDR5. A moderator can also reject a dump. The reason is shown next to its state in your account on the site and in the software (menu "Database", item "My Uploads"). If the same dump is already in the database, that is not a refusal: your upload counts as a confirmation of it.

Privacy

What does the server do with the serial number?

It writes zeros in its place before anything is stored. If a CRC covers the serial number, the server updates that CRC too, so a valid one stays valid. An invalid CRC is not fixed. No other byte changes.

Can anyone see who sent a dump?

No. Only moderators see the author.

Is the file name stored?

No. DdrRW sends only the SPD contents, without the file name, because the names it suggests for the modules it reads contain the serial number.

Repair

Can I write any reference into my module?

No, only a reference from a module of the same type and part number. Modules under one part number can have different chips, so take a reference with the same chips as your module: the search shows the chips of each dump. Before writing, compare your dump with the reference (menu "File", item "Compare with File"). DdrRW shows which bytes differ. The serial number in a reference is zeroed. Enter your own if needed (menu "Module", item "Date and Serial Number").

What is RSWP?

Reversible Software Write Protection of the SPD. Protected bytes can be read but not written until the protection is cleared. On DDR3 it covers the first 128 bytes, on DDR4 four blocks of 128 bytes, on DDR5 16 blocks of 64 bytes. Setting or clearing RSWP on DDR3 and DDR4 takes a raised voltage (about 9 V) on the SA0 pin of the module. DdrRW handles RSWP on DDR3, DDR4 and DDR5 and can clear it before a write and restore it afterwards by itself (the "Auto-protect" box in the write window).

Can DdrRW clear the permanent protection (PSWP)?

No. PSWP is set for good, and no programmer can clear it. SPD chips on DDR3 modules may have it. It locks the first 128 bytes, and they can never be changed after that. DdrRW never sets PSWP and never writes to the PMIC of DDR5 modules.

Bad CRC - is the module broken?

Not necessarily: some factory dumps have a bad CRC too. DdrRW shows which CRC areas do not match and recalculates them (menu "Edit", item "Fix CRC"). But check the dump against a reference first: if the data is damaged, a new CRC only hides the error.

Software and programmer

What do I need to read a module?

The DdrRW programmer is still in development, so for now read the module with any other programmer. The software already works with the resulting dump (.bin, .spd, .eep, .rom files): it decodes the SPD, compares, fixes the CRC, finds a reference and sends the dump to the database. If the module sits in a working computer, you can get its SPD without a programmer too: save a CPU-Z report (as .txt) or a MemTest86 log and open it in DdrRW (menu "File" > "Open HEX"). i2cdump output, a hex dump and text from the clipboard open the same way. i2cdump reads only 256 bytes, so for DDR4 and DDR5 the image will be incomplete. Writing the SPD back into the module still needs a programmer.

Which systems does the software run on?

Windows 10 and 11 (64-bit) and Linux x86_64 with glibc 2.36 or later (Debian 12, Ubuntu 24.04, Fedora 37 and newer).

Download DdrRW

How do I update the software?

In the software itself: menu "Settings" > "Updates" > "Application". It never looks for or installs updates unless you tell it to. Releases are signed, and DdrRW checks the signature before installing.

How much does the software cost?

The DdrRW software comes with the programmer. You can already download it.

Download DdrRW